JT6300D is the LTE-A CAT7 outdoor data unit specially designed to meet the high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. JT6300D can provide Gigabit PoE connection to connect user terminal device such as indoor router or Wi-Fi AP products, They are used for the customer's home or office to provide a larger wireless range and enhance mobility of usage.
JT6300D MTBF time is expected to be above 80,000 hours, It can provide up to 300Mbps max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.


Radio Access | 3GPP Release 11, Category 7 |
Operation Mode | FDD/TDD |
MIMO | 4Rx, 2Tx, DL 4*4 MIMO, UL QAM64 DL CA (2CC), UL QAM64 |
Channel BW | 5/10/20MHz,FDD+TDD Joint Flexible Carrier Aggregation combination |
Output Power | 23dBm per Tx |
Frequency Band | B7/38/40/41, B42/43/48 |
Antenna Gain | B7/38/40/41: 14dBi(2*2 CA) B7/38/40/41: 10dBi(4*4 MIMO) B42/43/48: 17dBi(2*2 CA) B42/43/48: 13dBi(4*4 MIMO) |
Dimensions | 250mm (L) * 250mm(W) * 75mm(D) |
Weight : | <2.5Kg |
Power Adapter | Input : 100-240V 50/60Hz 0.75A Output : DC 48V/0.5A (Gigabit PoE) |
Power Consumption | < 15W |
Data Interfaces | 1 RJ45 10/100/1000M ETH Port |
LED Indicator | PWR, SYS, NET, SIM, ETH, RF (5 Signal intensity LEDs) |
SIM Card | Single SIM card slot (2FF) |
Environment
| Operating T, -40℃ to 55℃ Storage T, -40º C to 85º C Humidity, 95% max Non-condensing |
Industry Standards | IEEE : IEEE 802.3 10Base Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet |
Ingress Protection Rating | IP67 |
Regulary | FCC / CE |