Product Detail

5G R16 FWA Wide band Outdoor CPE

 
Product Details
Mode JT8900D 3GPP R16, 5G NR, LTE-A CAT20
Frequency C-band Management FTP, HTTP,HTTPS and TR-069
Chipset Qualcomm X62 Antenna Gain-1 617-960MHz  2-3dBi (2x2) / 1400-2700MHz  7-9dBi (4x4) / 3300-6000MHz  9-10dBi (4x4)

JT8900D is the most advanced 5G NSA/SA NR Sub-6G outdoor data unit. It is specially designed to meet the most challenging demands of today's high-speed wireless backhaul and fixed wireless accessde ployments by 5G/4G/3G service operators. This unit can support multiple TDD& FDD band operations. Multiple operator network support can also be configured on the unit to enable its deployment across the entire country with different operators.


RELIABLE PERFORMANCE

The JT8900D is designed to meet the strict operating environment requirements for outdoor CPE devices. It can operate safely within a wide temperature range from-40 to +55 degrees Celsius and meets the industrial IP67 water and dust proof standard requirements. The MTBF of the device is expected to be above 80,000 hours. Depending on the network configuration and the downlink/uplink split ratio configuration, the unit can provide a maximum throughput of up to 4Gbps over the air. The typical coverage should be more than 15 kilometers with reasonably good throughput performance.

The JT8900D provides a 2.5G PoE connection to connect user terminal devices such as indoor routers or Wi-Fi AP products. The PoE interface of the unit can also work with standard PoE switches or router products. The product comes with a PoE power adapter and mounting bracket accessories for quick self-installation.


EASY USAGE & MANAGEMENT

The JT8900D is a user-friendly 5G NSA/SA NR Sub-6G CPE that is easy to install and maintain. It is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just need to connect the device to their computer or home switch/router, and the device will be ready to offer an Internet surfing experience. The LEDs on the JT8900D are also designed for user convenience and clearly indicate what the device is doing. The IP addresses can be dynamically obtained via DHCP.

The JT8900D offers rich management features that facilitate the tasks of service providers. It supports local management access, Telnet, WEB, and centralized remote OTA configuration, upgrades management and device monitoring via standard TR-069 ACS systems.


TECHNICAL FEATURES

The design of the JT8900D is based on the standard implementation of 3GPP release16 specifications. It can meet the most demanding requirements of large service providers in terms of high throughput and availability. The JT8900D is compatible with 4G LTE CAT20 standards and supports advanced features such as 4x4 MIMO and Carrier Aggregation up to 100MHz.


Technical Specifications

Physical

Dimensions

330mm   x 200mm x 85mm

Weight

<   2Kg

Power consumptions

<   12W

Power Supply

48V   0.5A DC (Passive PoE)

Ingress Protection

IP67

Environmental

Operating Temperature

-40 to   55

Storage Temperature

-45 to   85

Humidity

90%   max non-condensing

Wireless Radio Interface

Radio Access

3GPP   Release 16 5G NSA/SA   5G NR Sub-6G /LTE-TDD/LTE-FDD/WCDMA

Chipset

Qualcomm   X62

Frequency Band (NA Version)

5G-NR:   n2/5/7/12/13/14/25/26/29/30/38/41/48/66/71/77/78/79

LTE-FDD:   B2/4/5/7/12/13/14/17/25/26/29/30/66/71,

LTE-TDD:   B38/41/42/43/46*/48   

WCDMA:   B2/4/5

Frequency Band (EU Version)

5G-NR:   n1/3/5/7/8/20/26/ 28/40/41/48/77/78/79

LTE-FDD:   B1/3/5/7/8/18/19/20/26/28/32

LTE-TDD:   B38/39/40/41/42/43/46*/48

WCDMA:   B1/5/8

Receive Sensitivity

Compliance   with 3GPP standard

Output Power

23dBm±2dB

Antenna Gain

617-960MHz   2-3dBi (2x2) / 1400-2700MHz   7-9dBi (4x4) / 3300-6000MHz   9-10dBi (4x4)

User Interface

Data interface

1   RJ45 10/100/1000M/2500M ETH Port

GPS

Build-in

LED Indicators

PWR,   SYS, NET, SIM, ETH, RF (5 Signal intensity LEDs)

SIM Support

1.8V/3.0V   USIM 2FF

SW Specifications

Networking Configuration

Router   and L3 Bridge Operation Support

Built-in   DHCP Server for LAN Devices

IPv4   and IPv6 Support

Multiple   PDN Interface Support

Data Networking Features

VPN   Pass-through support (PPTP, L2TP & IPsec)

Built-in   L2TP & GRE Tunneling Client Support

DNS   Proxy Support

Firewall   & Access Control

DMZ   and Virtual Server Support

IP   and Port Forwarding Support

Local   and Remote Management Restriction

Application   Firewall Support

NTP   Service Support

LAN   Device Access Control

Device Management

CLI,   Telnet, HTTP and HTTPS Management Interfaces

Standard   Based TR-069 Management

FTP   and HTTP OTA Firmware Upgrade

USIM   and PLMN Locking Support

Device   Factory Default Setting


JT8900D ODU.png

JT8900D 5G NR Outdoor CPE Datasheet-X62 - V2 - NA.pdf