Product Detail

4G LTE-A Pro WDU Window CPE

 
Product Details
Mode JT7500D 3GPP 3GPP Release12,CAT12
Frequency FDD B1/3/5/7/8/20/28/66  TDD B38/39/40/B41/42/43/48 Management Telnet、FTP、HTTP and TR069 remote OTA
Chipset Qualcomm X12

JT7500D is a most advanced LTE CAT12 outdoor data unit specially designed to meet the most challenging demands of today’s high-speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD/FDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators.


JT7500D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from ‐40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 800Mbps max throughput over the air. The typical coverage should be more than 15km with reasonably good throughput performance.


JT7500D provides Gigabit PoE connection to connect user terminal device such as indoor router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.


JT7500D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet.


The LEDs on the JT7500D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.


JT7500D offers rich management features which facilitate the task of service provider. It supports local management access, Telnet, WEB, and centralized remote OTA configuration, upgrades management and device monitoring via standard TR-069 ACS systems.


JT7500D design is based on the standard implementation of LTE release 12 specification. It can meet the most demanding requirements of large service providers with high throughput and availability.


JT7500D is a CAT12 CPE and supports advance features such as 4x4 MIMO and Carrier Aggregation, QAM64 modulation on the uplink

JT7700D.png

7500D.jpg

LTE Radio Access

3GPP Release11 Category12

Operation Mode

TDD/FDD, 4Rx, 2Tx, DL 4x4 MIMO

CA

DL CA (2CC & 4CC),

UL CA (2CC), UL QAM64

Receive Sensitivity

Compliance with 3GPP standard

Output Power

23dBm±2dB

QoS Support

Non-GBR and GBR

Frequency Band

FDD B1/2/3/5/7/8/12/20/25/28

TDD B38/39/40/41/42/43/48

Antenna Gain

700~960MHz   3dBi

1700~2700MHz 5dBi (4x4

3400~3800MHz7dBi (4x4


WiFi Radio Access

IEEE802.11b/g/n

MIMO

2 x 2

Output Power

15dBm

Antenna

3dBi

Connected Users

8

Security

64/128-bit WEP, WPA/WPA2